17�Թ�����

Manufacturers need an integrated, comprehensive strategy for expanding their sector, and a large part of that is preserving and bringing back tax reforms, 17�Թ����� President and CEO Jay Timmons on CNBC’s “The Exchange” Wednesday.

What’s going on: Timmons spoke to the news channel from a teacher workroom at the Energy Institute High School in Houston, Texas, a stop on the first leg of the 17�Թ�����’s . He told show host Kelly Evans that any plans to bolster manufacturing in the U.S. must “start with renewing those tax reforms from 2017.”

• “A smart strategy is going to involve reducing the cost of doing business for manufacturers here in the United States,” he said, Republican House leadership for being “able to move” forward a House budget bill “that’s going to set the framework for those tax rates to be set, hopefully, permanently in stone.”
• The 665-student Energy Institute High School, led by Principal Lori Lambropoulos, is the first high school in the U.S. dedicated to preparing students for careers in the energy industry.

What else is needed: Timmons echoed some of the major themes from the 17�Թ����� State of Manufacturing Address, which he gave Tuesday in Ohio.

• “We also are looking at regulatory reform,” he told Evans. “We’re looking at expanding our energy dominance. We’re looking at workforce policy … and then, of course, we have to have a sensible trade policy as well.”

But back to taxes: Bringing back expired provisions from the 2017 Tax Cuts and Jobs Act, and making them and other, scheduled-to-expire provisions from the legislation permanent, is critical to manufacturing’s future success, Timmons continued.

• “Ninety percent of my 14,000 members are small and medium manufacturers. Most of them benefit from the pass-through deduction that expires this year. And I don’t think what you want to see is a huge tax increase that will cost in the economy happen if we don’t renew those reforms,” he said, citing data from a recent on the effects of a congressional failure to act on tax reforms.
• “That’s why the Speaker’s actions in the last day or so have been so incredibly important to get this thing moving forward. President Trump actually endorsed that bill—the ‘one big, beautiful bill,’ as he calls it—and that will help make America great again for manufacturing.”

��Energy dominance: Also critical to the success of manufacturing and the U.S. economy as a whole: the right energy policies, Timmons said. Promising to “unleash the energy sector,” President Trump lifted the previous administration’s ban on liquefied natural gas exports on his first day in office.

• Yesterday, the 17�Թ����� got to see first-hand some of the effects of that kept promise, when the team visited Freeport LNG’s liquefaction facilities near Houston.
• More than 9,000 construction jobs were created during the construction of those facilities, which now directly employ about 400 people. Their operations have an estimated total positive economic impact on the U.S. economy of more than $5 billion a year.
• “Energy is … a critical national security component,” Timmons said on CNBC.

Emphasis point: The tour also stopped at Bray International, a global leader in flow control and automation solutions, supporting U.S. energy dominance, LNG exports and high-tech manufacturing.

• The visit helped underscore why policies that support manufacturing investment and provide certainty to manufacturers are essential to America’s economic future.

Up next: Today, the 17�Թ����� is in Alabama, where this morning Manufacturing Institute President and Executive Director Carolyn Lee gave the Manufacturing Institute’s at Drake State Community & Technical College in Huntsville. (The MI is the 17�Թ�����’s 501(c)3 workforce development and education affiliate.)��The theme: building the workforce of the future.

• This afternoon, the team will tour Toyota Motor Manufacturing Alabama in Huntsville, the manufacturing facilities of Bruderer Machinery in Huntsville and Milo’s Tea Company in Bessemer.

“Manufacturing in the U.S. has momentum”—and to keep it going, manufacturers will need to push, 17�Թ����� President and CEO Jay Timmons Tuesday in the 17�Թ�����’s annual State of Manufacturing Address.
��
What’s going on: Speaking to an audience of manufacturers and congressional and state officials at Armstrong World Industries in Hilliard, Ohio, Timmons, who was joined by 17�Թ����� Board Chair and Johnson & Johnson Executive Vice President and Chief Technical Operations & Risk Officer Kathy Wengel, emphasized the “defining moment” for the industry and said that for manufacturing, “what happens next really matters.”

• “Uncertainty is the enemy of investment,” he told the crowd. “Manufacturing is a capital-intensive industry. We make decisions months and years in advance. … That’s why we need certainty. We need a clear, actionable, multistep strategy from our government—one that says, ‘We want you to invest here, hire here and succeed here.’”
• Timmons’ annual speech kicked off the 17�Թ�����’s 2025 Competing to Win Tour, starting with a whirlwind four-states-in-four-days tour of manufacturing facilities, schools, government offices and more.
• “In Ohio, manufacturers have thrived because our leaders have taken decisive actions to keep our industry competitive,” Ohio Manufacturers’ Association President Ryan Augsburger said at the kickoff event. But now, “manufacturers across Ohio and the nation are facing critical challenges, from tax uncertainty, project delays and workforce shortages to supply chain vulnerabilities and price pressures that threaten our ability to grow. … These issues cannot wait.”

What manufacturing needs: Certainty from the federal government should come in several forms, Timmons said, including the following:

• Preserving tax reform: The 2017 tax reforms were “rocket fuel” for manufacturing in America—but key provisions have expired and others are scheduled to sunset. Congress must bring them back and improve and extend the package. “Every day that Congress delays because of process and politics, manufacturers face rising uncertainty, delayed investments and fewer jobs,” said Timmons.
• Regulatory clarity and consistency: Manufacturers today spend a total of just to comply with regulations. “Commonsense regulation is critical to American manufacturers to continue to innovate, to compete against foreign manufacturers and to improve the lives of American citizens,” Austin So, general counsel, head of government relations and chief sustainability officer for Armstrong World Industries, told the crowd.
• Permitting reform: President Trump’s lifting of the liquefied natural gas export permit ban was a start, but to reach our full potential as energy leader, we must require “federal agencies to make faster decisions and reduc[e] baseless litigation,” said Timmons.
• Energy dominance: “America should be the undisputed leader in energy production and innovation. But … we are seeing opportunities for energy dominance fade in the face of a permitting process that takes 80% longer than other major, developed nations,” Timmons said, adding that we must cut red tape, require federal agencies to make faster decisions and reduce meritless litigation.������
• Workforce strategy: By 2033, manufacturing faces a shortfall of 1.9 million manufacturing employees, Timmons said. To fill those positions, the sector needs a “real workforce strategy,” one that includes apprenticeships, training programs and public–private partnerships.
• Commonsense trade policy: If President Trump continues to use tariffs, “we need a commonsense policy … that provides manufacturers with the certainty to invest” and “a clear runway to adjust,” according to Timmons.

State of manufacturing: “Manufacturing in the United States is moving forward,” Timmons said. “Like a press at full speed, like a production line firing on all cylinders, like the workers who show up before dawn and leave long after the job is done—manufacturing in the United States is driving us forward.” And Timmons added that now it’s time “to make America Great for Manufacturing Again.”

On the move: Following the speech, Timmons, Wengel and Augsburger joined state lawmakers, including state Sens. Kristina Roegner and Andrew Brenner, and local business leaders for a visit to the Ohio Statehouse for an event focused on the importance of tax reform for Ohio and its manufacturing sector.

• A recent found that, if key provisions of tax reform are allowed to expire, Ohio would risk losing 208,000 jobs and $18.9 billion in wages.

What’s at stake: Tax reform was transformational for Humtown Products, the Columbiana, Ohio–based family-owned sand cores and molds manufacturer, President and CEO Mark Lamoncha told the audience at the Ohio Statehouse tax event.

• “We have been at the forefront of 3D-printed manufacturing for years and have invested significantly in the machinery and equipment required, including the purchase of 3D printers—one of which can easily cost over $1 million,” he said.
• “Since the 2017 tax reform, Humtown has invested over $9 million in capital expenditures related to 3D printing and averages around $100,000 annually in R&D costs. Under the 2017 tax reform, we were able to deduct 100% of those costs, generating around $1.6 million in accelerated tax savings.”
• “That amount alone allowed us to purchase another 3D printer, fueling continued growth. That’s what tax certainty allowed us to do. But right now, that certainty is slipping away. As these provisions begin to expire, our tax burden is increasing.”

Creators Wanted: The group also fit in a stop at Columbus State Community College, which serves approximately 41,000 students, to visit with students in the semiconductor and mechanical drive classes.
��
The last word: The 17�Թ����� recently “stood shoulder-to-shoulder with congressional leaders—delivering a clear, urgent message on tax reform” and is “driving the agenda on regulatory certainty, on energy dominance, on permitting reform, health care and workforce development,” Wengel told the audience. “The 17�Թ����� is not waiting for Washington to act; we are making sure Washington acts for you, for manufacturers.”

• Added 17�Թ����� Executive Vice President Erin Streeter: “The 17�Թ����� is on [these issues], and we’re going to keep fighting, as we do every day with the right leaders, the right strategies and the right vision for the future.”

Washington, D.C. – 17�Թ����� President and CEO Jay Timmons released the following statement on President Donald Trump’s recent executive order establishing the National Energy Dominance Council:

“President Trump is moving quickly to unleash America’s full energy potential by establishing the National Energy Dominance Council, setting America up to lead on energy and secure our energy independence. This action demonstrates President Trump and his administration’s commitment to ensuring manufacturers have the energy they need to drive economic growth.

“On day one, President Trump declared the United States will be a manufacturing nation, lifting the moratorium on liquefied natural gas (LNG) export permits—one of the 17�Թ�����’s top recommended regulatory actions for the Trump administration to tackle. This was a significant move that will bolster our energy sector, strengthen our position in the global market and ensure manufacturers in America have the energy resources they need to power economic growth here at home.��We look forward to working with President Trump and the administration to improve the processes for permitting for all energy sources, which this action also addresses. The federal permitting system is broken—delaying projects that would create jobs, secure supply chains and reinforce America’s competitive edge.

“The National Energy Dominance Council, under the leadership of Interior Secretary Burgum and Energy Secretary Wright, will help power the future of manufacturing in America because when manufacturing wins, America wins.”

-17�Թ�����-

The 17�Թ����� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.93 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 17�Թ����� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 17�Թ����� or to follow us on Twitter and Facebook, please visit .

The Securities and Exchange Commission this week reversed Biden-era guidance that required publicly traded companies to include environmental and social activist shareholder proposals on proxy ballots ().

What’s going on: In a move that 17�Թ����� President and CEO Jay Timmons a “depoliticiz[ation of] the proxy process” and “a crucial plank of President Trump’s pro-manufacturing deregulatory agenda,” the SEC rescinded Staff Legal Bulletin 14L, which had allowed activists to mandate consideration of social policy proposals on corporate proxy ballots—even when the policies in question were unrelated to a company’s business.

Why it’s important: SLB 14L “empowered activists at the expense of manufacturers and Main Street investors—turning the proxy ballot into a debate club, forcing businesses to court controversy and divert resources from growth and value creation,” Timmons continued.

• Replacing SLB 14L with the new SLB 14M “return[s] the SEC’s review of shareholder proposals to a company-specific process based on relevance to a business’s operations and its investors’ returns,” which will “allow manufacturers to focus on what they do best: investing for growth, creating jobs and driving the American economy.”

What we’ve been doing: Since SLB 14L was adopted in 2021, the 17�Թ����� has been a leading voice calling on the SEC to .

• Most recently, the 17�Թ�����, along with more than 100 manufacturing associations, for President Trump more than three dozen regulatory actions the new administration could take across federal agencies to boost the manufacturing economy and end the regulatory onslaught—including rescinding SLB 14L.
• The 17�Թ����� also has President Trump’s nominee to chair the SEC, Paul Atkins, to take steps to depoliticize the proxy process.

The introduction of artificial intelligence has been a boon to manufacturing, and the technology will continue to have a positive impact—as long as regulations are “right-sized,” manufacturers told Congress this week.

What’s going on: “Manufacturers are utilizing AI in myriad ways on the shop floor and throughout their operations,” the 17�Թ����� the House Subcommittee on Commerce, Manufacturing and Trade in a statement for the record at Wednesday’s hearing, where data was .

• “The diverse use-cases of AI in manufacturing suggest a need for a cautious regulatory approach to this groundbreaking technology: one that supports innovation and U.S. leadership in AI while providing context-specific, risk-based, right-sized rules of the road for manufacturers,” the 17�Թ����� said.
• Giving testimony at the hearing, Siemens USA President and CEO and 17�Թ����� Board Member Barbara Humpton discussed the many benefits of using AI in manufacturing and emphasized the need to ensure that AI regulations include “targeted” rather than “overly broad” definitions.

Industrial vs. consumer-focused AI: First, it’s important to distinguish between industrial and consumer-facing AI, Humpton told the subcommittee members.

• “Industrial AI is different from consumer AI,” she said. “Industrial AI uses controlled data from the manufacturing environment to help manufacturers create business value. Think better products, more efficient operations, a more prepared workforce. … AI will enable all companies—from startups to small and medium enterprises to industrial giants—to thrive in this new era of American manufacturing.”
• In , she added that “the core distinction of industrial AI is that it is trained on highly monitored data from sensors and machines, providing a more reliable foundation for training AI models.”

Simple, singular and targeted: Regulation of AI should be undertaken with a light touch and following a full accounting of on-the-books laws to prevent duplicative and/or contradictory rules, the 17�Թ����� said.

• “[P]olicymakers should always review existing laws and regulations before enacting new ones, because most uses of AI correspond to tasks and objectives that industry has faced for a long time and that are thus highly likely to have already been addressed by existing laws and regulations,” said the 17�Թ�����, which also referenced its first-of-its-kind , “Working Smarter: How Manufacturers Are Using Artificial Intelligence,” released last May.
• “Similarly, policymakers must right-size any compliance burden associated with AI regulation,” the 17�Թ����� continued. “The ubiquitous use of AI throughout modern manufacturing, as well as manufacturing’s dependence on innovation, underscore the need for rules that enable rather than hinder manufacturers’ development and adoption of AI systems.”

Protect without hindering: Congress “must advance industrial AI by prioritizing strong rules for digital trade, especially to include strong protections for source code and algorithms,” Humpton went on in her written testimony. “We encourage policymakers to build upon the success of previous U.S.-led efforts to protect intellectual property.”

• Legislators must also safeguard privacy and protect against baseless legal claims, the 17�Թ����� said. “[I]t is … crucial that Congress take steps to maintain the privacy of personal data when utilized in AI contexts. … A federal standard should avoid a patchwork of state-level rules by fully preempting state privacy laws; it also should protect manufacturers from frivolous litigation.”

The last word: “The range and importance of uses of AI—transforming every aspect of the core of manufacturers’ operations—make it clear that AI has become integral to manufacturing,” said the 17�Թ�����. “With the right federal policies, manufacturers in the U.S. will continue to devise new and exciting ways to leverage AI to lead and innovate and stay ahead of their global competitors.”

Washington, D.C. – Following the Securities and Exchange Commission’s rescission of Staff Legal Bulletin 14L, which required publicly traded manufacturers to include activists’ ESG proposals on their proxy ballots even when the issues raised were unrelated to their business, 17�Թ����� President and CEO Jay Timmons released the following statement.

“Manufacturers asked for regulatory certainty, and President Trump has delivered. Today’s action by the SEC under Acting Chairman Mark Uyeda’s leadership depoliticizes the proxy process—a crucial plank of President Trump’s pro-manufacturing deregulatory agenda.

“As we relayed to President Trump in December, SLB 14L empowered activists at the expense of manufacturers and Main Street investors—turning the proxy ballot into a debate club, forcing businesses to court controversy and divert resources from growth and value creation. Returning the SEC’s review of shareholder proposals to a company-specific process based on relevance to a business’s operations and its investors’ returns will allow manufacturers to focus on what they do best: investing for growth, creating jobs and driving the American economy.”

Background:

In December, the 17�Թ�����, along with more than 100 manufacturing associations, ��to President Trump highlighting more than three dozen regulatory actions across a wide range of agencies that would boost the manufacturing economy and put a stop to the regulatory onslaught that is costing manufacturers��$350 billion each year, according to . President Trump began tackling these issues on Day 1, including by lifting the pause on liquefied natural gas exports. Today’s move by the SEC is another important step in the administration’s efforts to address burdensome regulations that are stifling manufacturing investment and growth

-17�Թ�����-

The 17�Թ����� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.93 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 17�Թ����� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 17�Թ����� or to follow us on Twitter and Facebook, please visit .

Washington, D.C. – 17�Թ����� President and CEO Jay Timmons released the following statement:

“Manufacturers in the United States are facing intense global competition, economic headwinds and unfair trade practices from adversarial nations. With critical tax reforms having lapsed and others still set to expire as well as inaction on comprehensive permitting reform, our industry is struggling to invest, innovate and compete.

“Manufacturing is a capital-intensive industry—and we must plan months and often years in advance to grow and compete. We cannot afford to wait on action, especially with additional cost pressures from the renewal and extension of tariffs. Manufacturers are calling on Congress to act now to renew the 2017 Tax Cuts and Jobs Act—failure to do so will put 6 million jobs at risk and make it even harder for manufacturers to drive growth and strengthen supply chains. We cannot risk giving our competitors an edge while jeopardizing American jobs and economic strength.”

-17�Թ�����-

The 17�Թ����� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.93 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 17�Թ����� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 17�Թ����� or to follow us on Twitter and Facebook, please visit

To lift much of the burden on manufacturers in the U.S., Congress must reinstate pro-growth tax measures, enact commonsense regulatory reforms and undertake comprehensive permitting reform. That was the main message of Click Bond CEO and 17�Թ����� Small and Medium Manufacturers Group Chair Karl Hutter to legislators yesterday on Capitol Hill.
��
What’s going on: “American businesses now shoulder a staggering $3 trillion annually in regulatory costs—disproportionately impacting manufacturers,” Hutter the House Committee on Small Business at Wednesday’s hearing.

• “Unfortunately, small companies get hit twice—with unworkable regulations that apply to them [and again with] compliance and reporting requirements that larger firms are forced to pass down. Fortunately, Congress and the Trump administration have the opportunity to reverse course.” ����

Rocket fuel for manufacturing: The 2017 Tax Cuts and Jobs Act “was rocket fuel for Click Bond,” said Hutter—whose Carson City, Nevada–based family business makes adhesive-bonded fasteners used by the U.S. military, commercial aviation industry and NASA.

• “The new 21% corporate tax rate allowed us to raise wages for production employees, invest in capital equipment, strengthen our employee tuition support program and accelerate the timeline for constructing a new facility. The new 20% pass-through deduction likewise empowered our suppliers and partners to reinvest in their businesses, readying them to support our growth.”����

Changes for the worse: But growth was halted in 2022 and 2023, when provisions from the TCJA began to expire. : More pro-growth tax measures are due to expire at the end of this year—unless Congress intervenes.

• “It is now more expensive for Click Bond to conduct R&D, the lifeblood of both our product and process innovation,” according to Hutter. “It’s more expensive for us to purchase capital equipment, the tools that will unleash the productivity of our team. And it’s more expensive for us to finance job-creating investments such as that state-of-the-art, sustainable manufacturing facility.”����

Ill effects: According to a recent released by the 17�Թ�����, nearly 6 million American jobs and more than $1 trillion of U.S. GDP will be at risk if Congress fails to act by the end of this year to preserve TCJA’s pro-manufacturing provisions.
��
What should be done: Manufacturers everywhere are struggling under the weight of both these provisions’ expiration and needless, out-of-date government requirements, Hutter went on. To fix these problems, he said, Congress should:

• Unwind “outdated chemicals reporting requirements that force us to look backward in time and deep into our supply chain”;
• Stop unnecessary permitting roadblocks by the Environmental Protection Agency at the state and local levels;
• Roll back expensive energy and labor mandates;
• Undertake “comprehensive permitting reform”; and
• the pro-manufacturing tax provisions scheduled to sunset at the end of 2025 and bring back already expired provisions that boosted the sector and the U.S. economy as a whole.

The final say: “Congress has a critical opportunity to right-size the regulatory landscape, put an end to permitting delays and protect manufacturers from devastating tax increases,” Hutter concluded. “I encourage you to seize [it] … because when manufacturing wins, America wins.”
��

By deciding to imposition of tariffs he announced last weekend on Mexico and Canada, President Trump shows he’s hearing manufacturers “loud and clear,” the 17�Թ����� said yesterday.

What’s going on: Two days after signing executive orders under the International Emergency Economic Powers Act to add new levies on goods from Mexico, Canada and China, President Trump ��a one-month pause yesterday on the 25% tariff on Mexican goods and the 25% tariff on Canadian goods, including the 10% levy on energy products.

• President Trump, who had cited illegal immigration and the flow of illicit drugs into the U.S. as the impetus for the new tariffs, Mexican President Claudia Sheinbaum agreed Monday morning to “immediately supply” 10,000 Mexican National Guard troops to the border.
• The announcement about the tariffs on goods from Canada came following an afternoon phone call between President Trump and Canadian Prime Minister Justin Trudeau.
• The 10% additional tariff applying to products from China went into effect today.��In response, China announced retaliatory tariffs on certain goods imported from the U.S., as well as additional restrictions on critical minerals exports to the U.S. (, subscription).

Staying competitive: “This decision by President Trump reflects��his swift move to keep his campaign promises, balancing a��commitment��to aggressive border enforcement��with the need to keep manufacturing in the United States competitive,” 17�Թ����� Executive Vice President Erin Streeter said.

• “The 17�Թ����� has worked closely with the administration, ensuring that the voices of manufacturers were heard loud and clear. Throughout the weekend, we engaged directly with senior officials, providing key data and real-world industry perspectives. Our efforts helped underscore the risks of broad-based tariffs and the importance of North American supply chains to manufacturing’s success.”
• 17�Թ����� President and CEO Jay Timmons reinforced President Trump’s and the manufacturing sector’s priorities in interviews Monday with and , as well as in a cited by the Wall Street Journal board.

Certainty needed: For manufacturing in the U.S. to thrive, “we need to bring costs down,” Timmons told ABC. “And if you don’t have that, or you have the uncertainty of what’s coming next, manufacturers are reluctant to invest in new plants and equipment and facilities. They’re reluctant to hire new workers … raise wages or increase benefits. … Once we get all this sorted out, I think it will be good news for manufacturers,” but the sooner that happens, the better, he concluded.

• Timmons also discussed President Trump’s landmark 2020 U.S.–Mexico–Canada Agreement, which he said provided manufacturers with the certainty the sector requires.
• “The certainty that was provided by a negotiated and accepted trade agreement by the three countries enabled manufacturers to make investment decisions,” Timmons told CNBC. “Now we have more uncertainty about what’s ahead … but we assume that there is a rationale for this.”

Key statistics: The USMCA was vital in shifting key imports away from China to North America. According to a new 17�Թ����� :

• Fully one-third of all U.S. manufacturing inputs come from Canada and Mexico;
• Some 70% of what we import from Canada and nearly 60% of imports from Mexico are capital equipment, industrial supplies and automotive parts that go into further manufacturing in the U.S.; and
• The value of U.S. imports of manufacturing materials from North America is now three times greater than the value of materials coming from China.

The bottom line: “We appreciate the administration’s continued willingness to receive our data and manufacturing stories,” Streeter went on. “We will continue working with policymakers to ensure that future decisions support both national security and manufacturing’s success.”

17�Թ����� in the news: The 17�Թ�����’s advocacy received widespread attention in the media, with , , ��(subscription), , ��(subscription),����and a (subscription) article all��highlighting its statements on the impact of tariffs on manufacturers.

• Its positions were also mentioned on��“,”��,�� ��and��

For a stronger, more competitive America, Congress must make permanent the pro-growth tax provisions from President Trump’s 2017 Tax Cuts and Jobs Act, 17�Թ����� President and CEO Jay Timmons and House Ways and Means Committee Chairman Jason Smith (R-MO) wrote in a recent op-ed for the .

What’s going on: “The choice is clear. Congress must deliver the results the American people voted for on Election Day by extending and expanding Trump’s pro-growth tax policies, which have worked so well.”

• The reforms allowed manufacturers “to hire, expand and invest in their communities” at historic rates, with a particularly positive effect on small and medium-sized businesses.
• Georgia-based , which produces machinery used in tubular parts and coaxial cable fabrication, would not have been able to expand its workforce, raise employee pay or purchase critical technology had it not been for the TCJA, as Winton CEO and Co-Owner and 17�Թ����� board member Lisa Winton told Congress in 2023.
• Austin Ramirez, president and CEO of hydraulic and electromechanical control systems maker in Wisconsin and 17�Թ����� Executive Committee member, told legislators that tax reform allowed his family-owned company “to create jobs, expand research and development, compete globally and invest in its future, including the most significant renovation of his business in 70 years,” Timmons and Chairman Smith wrote.

What’s at stake: “Key provisions of the 2017 Trump tax reforms have already expired, and many more are set to lapse later this year,” Timmons and Chairman Smith continued.

• “Without swift action, manufacturers will miss out on tax incentives for research and development and equipment purchases, while small businesses and family-owned manufacturers will see their tax rate double to as high as 43.4%—all at a time when global competition is intensifying.”

According to a recent 17�Թ����� cited in the op-ed, if Congress fails to preserve tax reform by the end of this year:

• Nearly 6 million U.S. jobs—more than 1 million of them in manufacturing—will be lost; and
• America will lose some $1.1 trillion in GDP and $540 billion in wages.

What must be done: Congress must act now to restore the pro-manufacturing tax provisions that have already sunset and make permanent those that are scheduled to expire, Timmons and Chairman Smith concluded.

• “With Trump leading the charge, it is time for Congress to deliver, protect these reforms and set American workers up for success in 2025 and beyond. Together, we can ensure the next chapter in America’s story is one of growth, opportunity and strength.”